Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Catalytic converter to turbocharger | M8 hexagon nut - always replace | Tightening torque | 25 Nm (19 ft. lb.) | ||
| Restraining straps for rear silencer | Cheese head bolt, M8 x 50 | Tightening torque | 15 Nm (11 ft. lb.) | ||
| Clamp on rear silencer | M10 thread - grease seat with high-temperature grease | Tightening torque | 55 Nm (41 ft. lb.) | ||
| Engine mounting | Special nut, M12 (internal Torx T55) | Tightening torque | 85 Nm (63 ft. lb.) |