Installing Rear Silencer

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Grease sliding bases and screw thread lightly with Optimoly HT high-temperature grease (Part No. 999.917.728.00).
Install rear silencer -3- .
1. 2.1. Slide the rear silencer into the connecting flanges for the second front silencer -1- .
2. 2.2. Position restraining straps -4- at the engine carrier bracket and tighten the cheese head bolts slightly.
  
  Fig 1: Identifying Front Silencer And Rear Silencer Connection Point
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Secure rear silencer.
1. 3.1. Fit and tighten new M8 lock nuts -1- at the connecting flanges.
  → Tightening torque: 23 Nm (17 ft. lb.)
2. 3.2. Tighten restraining straps -3- .
  → Tightening torque: 23 Nm (17 ft. lb.)
  
  Fig 2: Identifying Front/Rear Silencer Nuts
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.