Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Holder to rear silencer | M8 x 110 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Nut securing rear silencer to holder | M8 collar nut, replace if necessary | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Ball clamp mounting for tailpipe | External Torx screw, M8 | Tightening torque | 30 Nm (22 ft. lb.) | ||
| Clamping sleeve | M8 collar nut, replace if necessary | Tightening torque | 23 Nm (17 ft. lb.) | ||
| G-holder, bottom | External Torx screw, M8 x 25 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| G-holder to bracket | External Torx screw, M8 x 12 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Bracket to cylinder head | External Torx screw, M8 x 25 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Sheetmetal screw on rear apron | Tightening torque, item 1 | 3 Nm (2 ft. lb.) | |||
| Strut to longitudinal member on body | M6 screw | Tightening torque, item 2 | 10 Nm (7.5 ft. lb.) |