Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Upper part of heat shield to cylinder head cover | Outer Torx screw, M6 x 12 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Lower part of heat shield to cylinder head cover | Outer Torx screw, M6 x 12 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Rear silencer holder to cylinder head | M8 x 12 and M8 x 25 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Ground strap to cylinder head | Outer Torx screw, M8 | Tightening torque | 23 Nm (17 ft. lb.) |