LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (26 - Exhaust System -- CARRERA (997)) >> WM 261219 Removing And Installing Heat Shield (All Models) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Hot components
  • Risk of burns

→ Let hot components cool down.

→ Wear personal protective gear.

  1. Remove rear wheel.

    Socket-wrench insert P300  should be used to avoid damaging the rims.

    → 44051900 REMOVING AND INSTALLING WHEEL .

  2. Remove rear silencer.

    → 263319 REMOVING AND INSTALLING REAR SILENCER .

scientia non olet · About LEMON Manuals