LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (26 - Exhaust System -- CARRERA (997)) >> WM 261019 Removing And Installing Exhaust Manifold With Catalytic Converter (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Removal >> Repair Solution - Replacing Threaded Bolts On Three-Hole Flange

Repair Solution - Replacing Threaded Bolts On Three-Hole Flange

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tap out damaged threaded bolts on the exhaust manifold with a hammer.
    Fig 1: Tapping Threaded Bolts From Three-Hole Flange On Exhaust Manifold
    G09818197Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Use M8 x 30 screw (Part No. 900.075.365.02) instead of the threaded bolt.
scientia non olet · About LEMON Manuals