Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Rear silencer | Tightening torque | 23 Nm (17 ft. lb.) | |||
| Rear silencer | Lock nuts, M8 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Clamp | Fitting angle 45° | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Ball clamp for tailpipe cover | Tightening torque | 30 Nm (22 ft. lb.) | |||
| Support strut to rear silencer | Lock nut, M8 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Connection between front silencer and catalytic converter | Lock nuts, M8 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Screw for restraining strap | Cheese head bolt, M8 x 50 | Tightening torque | 15 Nm (11 ft. lb.) | ||
| For securing exhaust manifold to cylinder head | Torx screws, M8 x 21 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Holder for rear silencer to top of cylinder head | M8 x 12 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Holder for rear silencer to bottom of cylinder head | M8 x 25 | Tightening torque | 23 Nm (17 ft. lb.) |