LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (30 - Clutch, Control -- CARRERA (997)) >> WM 304519 Removing And Installing Release Bearing (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install clutch. → 305019 REMOVING AND INSTALLING CLUTCH 
  2. Refit the transmission. → Installing Transmission
  3. Install engine-transmission unit. → Installing Engine
scientia non olet · About LEMON Manuals