WM 303119 Removing And Installing Pressure Accumulator (Turbo Coupe, Turbo CABRIO): Information
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Actuate the clutch pedal at least 25 times so that the system is depressurized before detaching the pressure accumulator -arrow- .
The pressure accumulator is removed from below, in the engine/transmission/left drive shaft area.