LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (30 - Clutch, Control -- CARRERA (997)) >> WM 300519 Removing And Installing The Clutch Pedal (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Master cylinder   Tightening torque 7.5 ftlb.    
Pedal bearing axle   Tightening torque 6 ftlb. +1.5 ftlb.  
Pedal bearing axle: right lock nut (M8)   Tightening torque 7.5 ftlb.    
Pedal bearing axle: left lock nut (M14)   Tightening torque 34 ftlb.    
Bracket for clutch boost spring   Tightening torque 7.5 ftlb.    


Location Description Type Basic value Tolerance 1 Tolerance 2
Master cylinder   Tightening torque 7.5 ftlb.    
Pedal bearing axle   Tightening torque 6 ftlb. +1.5 ftlb.  
Pedal bearing axle: right lock nut (M8)   Tightening torque 7.5 ftlb.    
Pedal bearing axle: left lock nut (M14)   Tightening torque 34 ftlb.    
Bracket for clutch boost spring   Tightening torque 7.5 ftlb.    
scientia non olet · About LEMON Manuals