Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Adjustment dimension for frame for roll-over protection system | Centre pickup point (convertible top support), inner side section to frame cut-out right and left | Adjustment value | 491 mm | +/-1 mm | |
| Fastening screw (M10 x 55) securing Z support to body | Micro-encapsulated | Tightening torque | 45 Nm (33 ftlb.) | ||
| Fastening nut (M10) securing Z support to body | Micro-encapsulated | Tightening torque | 45 Nm (33 ftlb.) | ||
| Fastening screw (M10 x 35) securing frame for roll-over protection system to body | Micro-encapsulated | Tightening torque | 45 Nm (33 ftlb |