LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (69 Occupant Protection/Personal Protection -- CARRERA (997)) >> WM 696819 Removing And Installing AWS Control Unit (Folding Sports Bucket Seat) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front seat cushion. → 741319 REMOVING AND INSTALLING COVER FOR FRONT SEAT
  2. Connect the battery → 2706IN 00 WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY .
  3. If the AWS control unit was replaced, the new AWS control unit must be taught and calibrated under AWS Control unit replacement  . → Programming AWS Control Unit (Folding Sports Bucket Seat) →  Programming AWS Control Unit   →  6968K2 CALIBRATING AWS CONTROL UNIT  
scientia non olet · About LEMON Manuals