LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (69 Occupant Protection/Personal Protection -- CARRERA (997)) >> WM 695919 Removing And Installing Passenger's Airbag Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Speedster) >> Subsequent Work >> Reworking Passenger's Airbag Unit

Reworking Passenger's Airbag Unit

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the right air guide from the heater/air-conditioning unit to the side air vent (below the passenger's airbag unit).
  2. Install glove compartment. → 681519 REMOVING AND INSTALLING GLOVE COMPARTMENT
  3. Connect the battery. → Work instruction after disconnecting the battery