LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (69 Occupant Protection/Personal Protection -- CARRERA (997)) >> WM 695819 Removing And Installing Driver's Airbag Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Speedster) >> Preliminary Work For Driver's Airbag Unit

Preliminary Work For Driver's Airbag Unit

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Steering wheel control with the battery disconnected. Before the battery can be disconnected, the following steps must be completed:

  1. Insert ignition key into ignition lock, switch on ignition and then off again.
  2. Leave ignition key inserted.
  3. Disconnect battery. → 2706IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY