LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (69 Occupant Protection/Personal Protection -- CARRERA (997)) >> WM 692419 Removing And Installing Front Belt Lock (Air-Conditioned Comfort Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Preliminary work for driver's seat.
    1. 1.1. Remove front seat. → 720119 REMOVING AND INSTALLING BUCKET SEAT
    2. 1.2. Mount the front seat on the assembly fixture. → 7201IN MOUNTING FRONT SEAT ON ASSEMBLY FIXTURE
  2. Preliminary work for passenger seat with seat occupancy detection
    1. 2.1. Remove suction fan for seat surface. → 740919 REMOVING AND INSTALLING SUCTION FAN FOR SEAT SURFACE
scientia non olet · About LEMON Manuals