Checking Procedure For Seat Belt
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
After any accident, the seat belt system must be checked systematically for proper function and damage. If damage is found according to the test points, the entire seat belt system must be replaced.
Information
In the case of damage which does not occur as the result of an accident, e.g. wear, only the damaged part needs to be replaced.
Information
The following requirements must be met when fitting the seat belt.
If one of the requirements listed below is not met, the seat belt or seat-belt buckle must be replaced.