Check Belt Buckle

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Push the belt latch into the seat-belt buckle until it engages with an audible click. Check whether the lock mechanism has engaged by pulling strongly on the belt strap.

If the belt tongue fails to lock in the belt buckle even just once in at least 5 test procedures, the entire seat belt and belt buckle must be replaced.