LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (69 Occupant Protection/Personal Protection -- CARRERA (997)) >> WM 691119 Removing And Installing Front Three-Point Belt (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install side trim panel. → Installing Rear Side Trim Panel
  2. Connect battery. → 2706IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY
  3. Read out the fault memory using the PIWIS Tester 97180.
scientia non olet · About LEMON Manuals