Safety Instructions For Seat-Belt Tensioner Unit
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Incorrect handling of seat-belt pretensioner unit
- Triggering of seat-belt pretensioner unit
→ Observe safety regulations for handling seat-belt pretensioner units.
→ Observe disposal regulations for seat-belt pretensioner units.
→ After disconnecting the battery, wait 1 minute before disconnecting the seat-belt pretensioner unit.
→ Remove ignition key and disconnect the battery. Route or insulate the ground strap so that all contact with a ground carrier is avoided. Read and follow work instructions after disconnecting the battery 2706IN 00 WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY .
→ If removed for an extended period, the seat-belt pretensioner unit must be stored in a safe place.
→ Transport the seat-belt pretensioner unit in such a way that the seat belt can retract safely if it is actuated.