Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw, B+ holder to heater/air-conditioning unit | -7- | Tightening torque | 1.7 Nm (1.5 ftlb.) | ||
| Fastening screws, dashboard bracket to body | -5- | Tightening torque | 23 Nm (17 ftlb.) | ||
| Fastening screw, dashboard bracket to front of body | -4- | Tightening torque | 9.7 Nm (7.0 ftlb.) | ||
| Fastening screw, heater/air-conditioning to dashboard bracket | -3- | Tightening torque | 3.5 Nm (2.5 ftlb.) | ||
| Fastening nuts, heater/air-conditioning unit to firewall lid | -I- | Tightening torque | 9.7 Nm (7.0 ftlb.) | ||
| Fastening screw, expansion valve to evaporator | -2- | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Flange connections of refrigerant lines to plenum panel | -1- | M8 | 14 Nm (10.5 ftlb.) |