Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Hose holder to bracket | External Torx screw, M6 x 16 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Radiator bracket to body | Hexagon-head bolt, M8 x 25 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Radiator bracket to body | Collar nuts, M8 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Transverse strut to body | Collar nut, M6 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Hose holder to bracket | External Torx screw, M6 x 16 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Radiator bracket to body | Hexagon-head bolt, M8 x 25 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Radiator bracket to body | Collar nuts, M8 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Control unit to bracket | External Torx screw (E10), M6 x 16 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Transverse strut to body | Collar nut, M6 | Tightening torque | 10 Nm (7.5 ft. lb.) |