WM 195919 Removing And Installing Unit Carrier (Coolant Distributor Housing) (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO): Information

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Overview Of Coolant Distributor Housing

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unit carrier (coolant distributor housing)
Coolant flange
Bracket for coolant pump
External Torx screw, M8 x 35
External Torx screw, M8 x 50
External Torx screw, M8 x 70
Seals
O-rings