LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (19 - Engine - Cooling -- CARRERA (997)) >> WM 195819 Removing And Installing Coolant Regulator (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Mounting for coolant regulator housing, bottom M6 x 50 Tightening torque 13 Nm (9.5 ft. lb.)    
Mounting for coolant regulator housing, top M6 x 40 Tightening torque 13 Nm (9.5 ft. lb.)    
scientia non olet · About LEMON Manuals