LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (19 - Engine - Cooling -- CARRERA (997)) >> WM 192419 Removing And Installing Air Guide (Gt2 RS) >> Removing Air Guide

Removing Air Guide

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove left -1-  or right air guide. Left side in direction of travel is shown (right side is a mirror image).
    1. 1.1. Unscrew three tapping screws (internal Torx, 5 x 16).
      Fig 1: Removing Air Guide Mounting
      G09827650Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Turn the air guide outwards by approx. 90 degrees and disengage tabs on the radiator -arrow-  .
    Fig 2: Locating Radiator Air Guide Mounting
    G09827651Courtesy of PORSCHE CARS NORTH AMERICA, INC.