Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Oil/water heat exchanger to bracket | Internal Torx screws, M6 x 20 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Bracket for oil/water heat exchanger to crankcase | External Torx screw, M6 x 45 | Tightening torque | 13 Nm (9.5 ft. lb.) | ||
| High-pressure connecting line on fuel collection pipe | Union nut | Tightening torque | 25 Nm (19 ft. lb.) | +/-3 Nm (+/-2 ft. lb.) | |
| Holder for high-pressure connecting line | External Torx screws, M6 x 16 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Engine carrier to engine mounting | Collar nut, M12 | Tightening torque | 85 Nm (63 ft. lb.) |