Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw-type clamps on coolant hoses | Tightening torque | 3 Nm (2 ft. lb.) | |||
| Oil/water heat exchanger bracket to crankcase | Screw, M6 x 20 | Tightening torque | 13 Nm (9.5 ft. lb.) | ||
| Oil bracket support mounting | External Torx screws, M6 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Oil/water heat exchanger to bracket | External Torx screw, M6 x 16 - always replace O-rings | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Oil tank | M8 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Union nut securing fuel line to fuel collection pipe | Always counter while tightening | Tightening torque | 30 Nm (22 ft. lb.) | ||
| Clamps on fuel line | External Torx screws, M6 | Tightening torque | 10 Nm (7.5 ft. lb.) |