Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Drain plug on oil tank | M20 x 1.5, replace sealing ring | Tightening torque | 60 Nm (44 ft. lb.) | ||
| Feed line to crankcase | Outer Torx screw, M6 x 16 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Oil line to oil tank | Union nut, M30 x 1.5, a/f 32 | Tightening torque | 60 Nm (44 ft. lb.) | ||
| Oil line to oil tank | Union nut, M30 x 1.5, a/f 32 | Tightening torque | 60 Nm (44 ft. lb.) | ||
| Clamping bow on oil filler tube | M6 collar nut | Tightening torque | 10 Nm (7.5 ft. lb.) |