Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Oil/water heat exchanger | Internal Torx screws (T30), M6 x 20 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| High-pressure connecting line on fuel collection pipe | Coat union nut with OKS 1700 | Tightening torque | 20 Nm (15 ft. lb.) | ||
| Holder for high-pressure connecting line | External Torx screws, M6 (E10) | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Engine mounting | Special nut, M12 (internal Torx T55) | Tightening torque | 85 Nm (63 ft. lb.) |