LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (17 - Engine - Lubrication -- CARRERA (997)) >> WM 172619 Removing And Installing Oil Pressure Control Valve (Except Gt2 & Gt3) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle.
    WARNING: Vehicle can fall down
    • Risk of squashing or crushing
    • Risk of damage to the vehicle

    → Do not place any solid objects under the raised vehicle.

    → Ensure that the lifting platform is prevented from lowering.

    → Remove solid objects before lowering the vehicle.

    → Raise the vehicle only at the jacking points provided.

    → The outer jacking points should be used primarily.

    → 4X00IN01 LIFTING THE VEHICLE .

  2. Drain engine oil.

    → 170155 CHANGING ENGINE OIL AND OIL FILTER .