Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Install the oil pan.
→ 175019 REMOVING AND INSTALLING OIL PAN .
Fill in engine oil.
→ 170155 CHANGING ENGINE OIL AND OIL FILTER .
PIWIS Tester 9718 can now be connected.
Start the engine and let it heat up until the operating temperature is reached (engine oil temperature is at least 80° C).
Inspect the oil pan for leaks.
Check engine-oil level.
→ 170101 CHECKING ENGINE-OIL LEVEL .
Check engine oil pressure.
→ 170301 CHECKING OIL PRESSURE .