LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (17 - Engine - Lubrication -- CARRERA (997)) >> WM 171919 Removing And Installing Oil Suction Pump (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt3 & Gt3 RS) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. GT3:  Clip in vacuum line for exhaust valve on the engine carrier.
  2. Fill in engine oil → 170155 CHANGING ENGINE OIL AND OIL FILTER .
    CAUTION: Driving off while the vehicle is on the lifting platform
    • Risk of squashing
    • Risk of damage to components

    → Raise the vehicle until the wheels cannot touch the ground.

  3. Allow the engine to warm up on the lifting platform and check the pump for leaks.
scientia non olet · About LEMON Manuals