Installing Oil-Level Sender

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Install oil-level sender.
1. 1.1. Insert oil-level sender -1- , fit and tighten screw -2- .
  → Tightening torque: 10 Nm (7.5 ft. lb.)
  
  Fig 1: Removing/Installing Oil Filler Neck
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 1.2. Connect cable plug.