Removing and installing horn: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Observe installation position of the horns. The horn must not touch the body or a bracket.
- A toothed washer must be fitted between the horn and bracket. Tightening torque of the M6 hexagon nut = 10 Nm (7.5 ftlb.)