Assemble instrument cluster
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Carefully assemble display unit and front frame. Engage clips (new version).
- Before installing the electronic unit, check that the two green guide rails are pushed outwards.
- Assemble the electronic unit and display unit carefully and evenly (do not tilt). Engage the clip in the centre at the bottom. Close the locking tab on the upper part of the electronic unit in the top of the front frame bracket.
- Using a screwdriver, push the two green guide rails inwards over the contact connector (take care that they are not crooked).
- Push the right and left sheetmetal springs over the fixing lugs.
- Push on the adjustment button of the clock and trip mileage counter.