LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (70 - Linings, Insulation -- CARRERA (997)) >> WM 708519 Removing And Installing Rear Roof Lining (Except CABRIO) >> Installing Rear Roof Lining >> Installing Rear Roof Trim Panel

Installing Rear Roof Trim Panel

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Roof Trim Panel Installation Position
G09829382Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

If cable clamps are not replaced, this can cause noises in the roof trim panel when driving.

  2. Position roof trim panel -1-  and press into place in -direction of arrow-  ensuring that the pegs engage audibly in the cable clamps -2-  .
    Fig 2: Installing Rear Roof Trim Panel
    G09829383Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals