LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (70 - Linings, Insulation -- CARRERA (997)) >> WM 708219 Removing And Installing Front Trim (TARGA 4 & TARGA 4S) >> Installing Front Trim >> Installing Front Trim Panel

Installing Front Trim Panel

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front trim panel.
    1. 1.1. Position front trim panel -3-  (-Arrow-  ).
    2. 1.2. Connect connector for interior light -4-  (-Arrow-  ) until the connector engages securely.
    3. 1.3. Secure front trim panel -3-  with the fastening screws -2-  . → Tightening torque: 2.3 Nm (2.0 ft. lb.) 
    4. 1.4. Clip covers -1-  into the front trim panel -3-  .
      Fig 1: Installing Front Trim Panel
      G09829342Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals