LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (70 - Linings, Insulation -- CARRERA (997)) >> WM 708019 Removing And Installing Roof Rail Trim (TARGA 4 & TARGA 4S) >> Removing Roof Rail Trim >> Releasing Rear Belt Cover

Releasing Rear Belt Cover

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert a small screwdriver sideways into the cover -1-  and remove the cover.
    Fig 1: Releasing Rear Belt Cover
    G09829325Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew fastening screws -2 and 3-  .
  3. Pull rear belt cover -4-  forward in direction of travel, pull connector off the interior light -5-  and set rear belt cover -4-  aside.
scientia non olet · About LEMON Manuals