LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (70 - Linings, Insulation -- CARRERA (997)) >> WM 708019 Removing And Installing Roof Rail Trim (TARGA 4 & TARGA 4S) >> Installing Roof Rail Trim >> Securing Rear Belt Cover

Securing Rear Belt Cover

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position rear belt cover -4-  , connect connector to the interior light -5-  and slide rear belt cover -4-  backwards into the metal clips -6-  .
    Fig 1: Securing Rear Belt Cover
    G09829331Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Tighten fastening screws -2 and 3-  . → Tightening torque: 3 Nm (2.0 ft. lb.) → Tightening torque: 2 Nm (1.5 ft. lb.) 
  3. Insert cover -1-  into the belt cover -4-  and press it in.
scientia non olet · About LEMON Manuals