Installing Roof Rail Trim: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Install roof rail trim.
1. 1.1. Position roof rail trim -3- and secure it by screwing in fastening screws -1- through the metal clips -2- . → Tightening torque: 1.6 Nm (1.0 ft. lb.)
  
  Fig 1: Installing Roof Rail Trim
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Secure roof rail trim close to the windscreen frame.
1. 2.1. Position cover -2 - on the roof rail trim -3- and secure with the fastening screw -1- . → Tightening torque: 1.6 Nm (1.0 ft. lb.)
  
  Fig 2: Securing Roof Rail Trim
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.