LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (70 - Linings, Insulation -- CARRERA (997)) >> WM 706819 Removing And Installing C-Pillar Trim (All Models) >> Installing C-Pillar Trim >> Installing C-Pillar Trim Panel

Installing C-Pillar Trim Panel

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying C-Pillar Trim Panel Installation Position
G09829295Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Check sheetmetal clips -3-  , replacing if necessary.
    Fig 2: Installing C-Pillar Trim
    G09829296Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Thread seat belt with mounting component -2-  through the C-pillar trim panel -1- -Arrow A-  .
  3. Position C-pillar trim panel -1-  on the C-pillar and clip in.
scientia non olet · About LEMON Manuals