Removing B-pillar trim panel

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying B-Pillar Trim Panel Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Lift up coat hook bracket -1- from below with a plastic spatula -arrow- and carefully pull up and off.

Fig 2: Unclipping Coat Hook Bracket
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Press seat belt height adjuster actuator -1- out of the fastening screw using a screwdriver.

Fig 3: Pressing Out Seat Belt Height Adjuster Actuator
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew fastening screw -1- from sash guide mount -2- .

Fig 4: Removing B-Pillar Trim Panel
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew fastening screw -3- . Lift B-pillar trim -4- up and out.