LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (70 - Linings, Insulation -- CARRERA (997)) >> WM 705819 Removing And Installing Trim Strip For The Instrument Panel (All Models) >> Installing Trim Strip For The Instrument Panel >> Installing Trim Strip For Dashboard (On Driver's Side)

Installing Trim Strip For Dashboard (On Driver's Side)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position right trim strip -1-  on the dashboard and press in until it clicks into place.
    Fig 1: Installing Right Trim Strip (Driver Side)
    G09829222Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Position left trim strip -1-  on the dashboard and press in until it clicks into place.
    Fig 2: Installing Left Trim Strip (Driver Side)
    G09829223Courtesy of PORSCHE CARS NORTH AMERICA, INC.