LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (70 - Linings, Insulation -- CARRERA (997)) >> WM 705719 Removing And Installing A-Pillar Trim Panel (TARGA 4 & TARGA 4S) >> Removing A-Pillar Trim Panel >> Notes

Removing A-Pillar Trim Panel: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying A-Pillar Trim Panel Installation Position
G09829210Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unclip A-pillar trim panel -1-  along the roof frame and windscreen frame and remove it by pulling it inwards.
    Fig 2: Removing A-Pillar Trim Panel
    G09829211Courtesy of PORSCHE CARS NORTH AMERICA, INC.