LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (70 - Linings, Insulation -- CARRERA (997)) >> WM 705719 Removing And Installing A-Pillar Trim (All Models) >> Removing A-Pillar Trim

Removing A-Pillar Trim

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying A-Pillar Trim Installation Position
G09829206Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Pull the A-pillar trim -1-  inwards along the roof frame and windscreen frame -arrow-  .
    Fig 2: Removing A-Pillar Trim Panel
    G09829207Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals