LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (70 - Linings, Insulation -- CARRERA (997)) >> WM 705719 Removing And Installing A-Pillar Trim (All Models) >> Installing A-Pillar Trim >> Installing A-Pillar Trim Panel

Installing A-Pillar Trim Panel

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying A-Pillar Trim Panel Installation Position
G09829208Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Check sheetmetal clips -2-  , replacing if necessary.
    Fig 2: Installing A-Pillar Trim Panel
    G09829209Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Information 

    Ensure that deformation element is seated correctly before installation.

  2. Insert the A-pillar trim panel -1-  at side of windscreen frame (transition to dashboard) and clip it in along the roof frame.
scientia non olet · About LEMON Manuals