Removing Rear Cover

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Removing trim for the rear.

Fig 1: Identifying Rear Cover Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pull rear cover -1- up slightly -Arrows A, B- .

Fig 2: Removing Rear Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Guide rear cover -1- sideways out of the side trim panel and pull it forwards to remove it -Arrow C- .