LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (70 - Linings, Insulation -- CARRERA (997)) >> WM 704119 Removing And Installing Floor Covering (All Models) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front seat at right and left. → 720119 REMOVING AND INSTALLING FRONT SEAT - section on "Removing"
  2. Remove rear side trim panel at left and right. → 707519 REMOVING AND INSTALLING REAR SIDE TRIM PANEL  - section on "Removing"
  3. Remove inner door sill trim on the right and left. → 680519 REMOVING AND INSTALLING INNER DOOR SILL TRIM - section on "Removing"
  4. Remove front side-section trim panel (driver's side). → 702419 REMOVING AND INSTALLING FRONT SIDE-SECTION TRIM PANEL  - section on "Removing"
  5. Remove footrest. → 703519 REMOVING AND INSTALLING FOOTREST  - section on "Removing"
  6. Remove accelerator pedal. → 208019 REMOVING AND INSTALLING ACCELERATOR PEDAL - section on "Removing"
  7. Remove gearshift bracket. → WM 340819 REMOVING AND INSTALLING GEARSHIFT BRACKET (EXCEPT TURBO) - section on "Removing" 
  8. Remove parking-brake lever. → 466119 REMOVING AND INSTALLING PARKING-BRAKE LEVER - section on "Removing"
scientia non olet · About LEMON Manuals