LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (70 - Linings, Insulation -- CARRERA (997)) >> WM 704119 Removing And Installing Floor Covering (All Models) >> Installing Floor Covering

Installing Floor Covering

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert floor covering -1-  in the vehicle and align in the sequence shown, -A, B, C-  .
    Fig 1: Installing Floor Covering
    G09829182Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Secure Velcro fasteners around the center tunnel.
    Fig 2: Securing Velcro Fasteners
    G09829183Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Secure floor covering -1-  in the area around the bottom of the A-pillar (passenger's side) -Arrow A-  .
    Fig 3: Securing Floor Covering
    G09829184Courtesy of PORSCHE CARS NORTH AMERICA, INC.