Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw securing cover for rear lock support to body | Tightening torque | 3 Nm (2.0 ft. lb.) | |||
| Handle strip of rear window cover with respect to the rear center panel | Rear window cover only lowered (max. 3 mm) | Gap dimension | 6 mm | +/-1 mm |