LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (70 - Linings, Insulation -- CARRERA (997)) >> WM 702919 Removing And Installing Trim Panel For Seat Well (All Models) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fold front seats forward.
  2. Remove rear backrest. → 724719 REMOVING AND INSTALLING REAR BACKREST - section on "Removing"
  3. Remove rear side trim panel at left and right. → 707519 REMOVING AND INSTALLING REAR SIDE TRIM PANEL  - section on "Removing"
  4. Remove cover for rear. → 705319 REMOVING AND INSTALLING COVER FOR REAR  - section on "Removing"
  5. Remove rear belt locks at the right and left. → 692519 REMOVING AND INSTALLING REAR BELT LOCK - section on "Removing"
scientia non olet · About LEMON Manuals